The link communication between satellite and the Earth Station is exposed to a lot of impairments such as noise, rain and atmospheric attenuations. The successful implementation of satellite communications need to the efficient system design to ensure robust air links for the communications signals.

Also know, what is satellite link design?

A satellite communication network consists of a number of earth stations inter- connected via a satellite. The source-to-destination path can be partitioned for the purpose of radio link design as: the earth station-satellite link or uplink; the satellite path; and the satellite-earth station link or downlink.

Furthermore, why uplink design is easier than downlink design? The Uplink design is easier than the downlink, since an accurately specified carrier power must be presented at the satellite transponder and it is often feasible to use much higher power transmitters at earth stations than can be used on a satellite.

Hereof, what is the need of satellite?

Satellites provide in-flight phone communications on airplanes, and are often the main conduit of voice communication for rural areas and areas where phone lines are damaged after a disaster. Satellites also provide the primary timing source for cell phones and pagers.

What is the equation of receiver power in dB in satellite link design?

A simple link budget equation looks like this: Received power (dB) = transmitted power (dB) + gains (dB) − losses (dB)

Related Question Answers

What are the elements of satellite communication?

Satellite communication has two main components: the ground segment, which consists of fixed or mobile transmission, reception, and ancillary equipment, and the space segment, which primarily is the satellite itself.

What is carrier to noise ratio in a satellite?

In satellite communications, carrier-to-noise-density ratio (C/N0) is the ratio of the carrier power C to the noise power density N0, expressed in dB-Hz. When considering only the receiver as a source of noise, it is called carrier-to-receiver-noise-density ratio.

What is link power budget?

Power Budget. All datalinks are limited by the power budget of the link. The power budget is the difference between the output power of the transmitter and the input power requirements of the receiver, both of which are defined as power coupled into or out of optical fiber of a type specified by the link.

What is G T in satellite communication?

Antenna gain-to-noise-temperature (G/T) is a figure of merit in the characterization of antenna performance, where G is the antenna gain in decibels at the receive frequency, and T is the equivalent noise temperature of the receiving system in kelvins.

What is uplink and downlink frequency?

The uplink frequency is the frequency which is used for transmission of signals from earth station transmitter to the satellite. The downlink frequency is the frequency which is used for transmission of signals from the satellite to the earth station receiver.

What is the point on the surface of the Earth that is directly below the satellite called?

Explanation: The satellite location is specified by a point on the surface of the earth directly below the satellite. This point is known as the subsatellite point (SSP). The subsatellite point is then located by using conventional latitude and longitude designations.

Do we need satellites?

Weather satellites help us observe the Earth from space to help predict weather patterns. Radio and television satellites beam our favorite songs, movies, and television shows to Earth for us to enjoy. There's even a group of 27 satellites that make up the Global Positioning System (GPS).

What are the 3 types of satellites?

Common types include military and civilian Earth observation satellites, communications satellites, navigation satellites, weather satellites, and space telescopes. Space stations and human spacecraft in orbit are also satellites.

What would happen without satellites?

Without satellites, we wouldn't have much choice in our television programs either, because there would be no more direct-to-home broadcasting, and cable operators would no longer have easy access to such a wide variety of channels.

Why do we need satellite communication?

The purpose of communications satellites is to relay the signal around the curve of the Earth allowing communication between widely separated geographical points. Communications satellites use a wide range of radio and microwave frequencies. This allocation of bands minimizes the risk of signal interference.

How satellites affect our daily life?

Satellite data can be used in many ways: it allows us to analyse weather from space, see changes in climate patterns and estimate sea and ice levels. But monitoring the earth from space can play a very important role also when it comes to everyday life.

How many satellites are in space?

Right now, there are nearly 6,000 satellites circling our tiny planet. About 60% of those are defunct satellites—space junk—and roughly 40% are operational. As highlighted in the chart above, The Union of Concerned Scientists (UCS), determined that 2,666 operational satellites circled the globe in April of 2020.

What are the advantages of artificial satellites?

What are the advantages of artificial satellites
  • Used in long distance communications such as television, fax, internet, etc.
  • Used in television and radio broadcasting.
  • Weather forecasting i.e. rainfall, snowfall, storm, etc.
  • Agriculture monitoring i.e. crop disease and crop failure.

What do satellite cells do?

Satellite glial cells (or satellite cells) (formerly called amphicytes) are glial cells that cover the surface of neuron cell bodies in ganglia of the peripheral nervous system. Thus, they are found in sensory, sympathetic, and parasympathetic ganglia. Satellite cells also act as protective, cushioning cells.

What are the two main types of satellites?

There are two different types of satellites – natural and man-made. Examples of natural satellites are the Earth and Moon. The Earth rotates around the Sun and the Moon rotates around the Earth. A man-made satellite is a machine that is launched into space and orbits around a body in space.

Which antenna is used in satellite?

The different types of antennas used in satellite communication are as follows:
  • Horn Antenna.
  • Parabolic Reflector Antenna.
  • Parabolic Reflector Antenna with offset feed.
  • Double Reflector Antenna.
  • Shaped Reflector Antenna.

Why uplink is more than downlink?

All Answers (12) It say basically the power at ground stations is more as compared to power available at satellites.So generally frequency for uplink is kept higher than the downlink. There is greater attenuation due to rain when the signal frequency is high.so downlink is also kept at lower frequency.

What does EIRP mean?

Effective Isotropic Radiated Power

What is the uplink frequency of satellite?

Communications satellites, uplink in either the 27.5 GHz and 31 GHz bands, and high-resolution, close-range targeting radars on military aircraft.

What are the two methods of calculating the link budget?

There are two different ways to calculate link budget. Each has its own use: SNR (Signal to Noise ratio) Method: The calculations using this method reveal what power of signal can we expect to receive at the antenna, and whether it is above the noise floor. It also reveals the difference in signal and noise power.

What is link margin in satellite communication?

In a wireless communication system, the link margin (LKM), measured in dB, is the difference between the minimum expected power received at the receiver's end, and the receiver's sensitivity (i.e., the received power at which the receiver will stop working).

What is duplex distance?

Duplex distance is the space between the uplink and downlink frequencies. The duplex distance for GSM is 80 MHz, where each channel has two frequencies that are 80 MHz apart.

Why must a satellite have distinct uplink and downlink frequencies?

?The reason that a satellite must have a distinct uplink and downlink set of frequencies is because they help avoid any type of interference that may occur. The uplink receives the signal and amplifies it so that it can be transmitted to another frequency (downlink).

What is the primary use of communication satellites?

Communications satellites are used primarily in long-distance telephone communications and for distribution of TV signals.

What are the types of antenna losses?

Typically the simplest is to consider two types of loss: ohmic loss and ground loss.

What is antenna losses?

The efficiency of an antenna is a ratio of the power delivered to the antenna relative to the power radiated from the antenna. A low efficiency antenna has most of the power absorbed as losses within the antenna, or reflected away due to impedance mismatch.

What is a good fade margin?

The 10 dB to 25 dB buffer above the receive sensitivity threshold is the fade margin. Up to 5 miles should have at least a 15 dB fade margin, and links greater than that should be higher. A fade margin of 25 dB is recommended for links greater than 5 miles.

How is transmit power calculated?

P R ∝ G × P T f 2 × d α , where f is the carrier frequency, d is the propagation distance, G is the power gain from the transmit and receive antennas, and α = 2.

How is EIRP calculated?

A simple rectangular conducting plate with a dimension of 0.15 m × 0.6 m in the x- and y-directions, respectively, was excited by the wave-port model. Since the input power to the antenna was 0 dB and the simulated far-field gain was = 15.44 dBi, the reference EIRP can be calculated as EIRP = = 15.44 + 0.0 = 15.44 dB.

What is path loss in wireless communication?

Path loss, or path attenuation, is the reduction in power density (attenuation) of an electromagnetic wave as it propagates through space. This term is commonly used in wireless communications and signal propagation.

What is link budget in LTE?

As the name suggests, a link budget is simply the accounting of all of the gains and losses from the transmitter, through the medium (free space, cable, waveguide, fiber, etc.) to the receiver in a telecommunication system. In this page, we will briefly discuss link budget calculations for LTE.

How is link margin calculated?

the minimum received signal level of the receiving radio, then a link is possible. ? The difference between the minimum received signal level and the actual received power is called the link margin.

What is free space propagation model?

The free space propagation model assumes a transmit antenna and a receive antenna to be located in an otherwise empty environment. Neither absorbing obstacles nor reflecting surfaces are considered. Transmit power is spread over the surface area of a hypothetical sphere.